CRESSI Apnea Training Buoy

High-end buoy for freediving training and signaling developed and tested in collaboration with the Cressi apnea team.

Features:

– Outer fabric in 840 D Polyester in fluorescent red-orange color with anti-UV treatment. This fabric is especially light and does not accumulate water, therefore it dries very quickly
– Inflation by means of a rubber nozzle with non-return valve and stopper. Low profile deflation valve with pull handle. Both located in the inner chamber to prevent accidental activation
– Inner chamber in 210D Nylon with internal injection of polyurethane.
– Lower straps in Dyneema® for a much higher resistance and duration than usual in this type of buoys that have a critical area of ??tears at the point of tension of the ballast in the central ring after a while. Base with reinforced drainage net
– Inflation by means of a rubber nozzle with non-return valve and stopper. Low profile deflation valve with pull handle. Both located in the inner chamber to prevent accidental activation
– 8 handles with rubber cover and 4 stainless steel rings on the outer profile
– Access to the central compartment with plastic zipper with YKK 8 pitch double slider, 100% resistant to salt spray and velcro
– External diameter of 72 cm, inner donut diameter of 22 cm with a lifting capacity of 16 kg
– Capacity of up to 100 meters of rope between Ø8 and Ø10 mm
– Double flag pole: Alfa – underwater diver (international code) and diving flag (American) with high visibility and secure anchorage that guarantees its verticality